If you have recently received and installed an updated BIOS chip for your EVGA motherboard you may encounter issues posting or getting into BIOS.

It is recommended that you pay very close attention when installing the updated BIOS chip as it will only install in one direction.

Once you have the bios chip installed please use the CLEAR CMOS button on your motherboard. Hold this button for 5 seconds and then release to clear any previous BIOS settings.

You can also clear your CMOS by removing the small motherboard battery for 10 seconds and then reinstalling the battery.

You should only use these methods of clearing the CMOS while the system is powered down.